Tel: +86-0571-86706512

Jason: +8613706515368



Add: Yuhang District of the city of Hangzhou in West Zhejiang province 1818-2 (Chinese AI town) 8-4F room

Home > Technical Support > Self-Adaption


Make sure your hardware satisfies the following conditions if you choose a self-adaptive PC device:

CPU:I5-4590 or higher

Memory:8GB or more

Graphics card:Geforce GTX1070 or higher

Hard disk:Available disk space≥200GB

Screen resolution:1920x1080 or higher



1.Please make sure your PC display/projector/television display plug or transformer plug matches the port of headset as HTC VIVE's HDMI port or DP port has been used already(DP to Mini DP cable is not included). 

2.If both of independent graphics card and motherboard of the device have display signal ports, make sure you connect the signal wire to the independent graphics card. Otherwise, the signal port on motherboard may not be available to use or use at fault.

3.An overlong signal wire(≥10m) may cause a failure in signal transmission. Make sure the wire  length is adequate when you install the KAT WALK.

Your PC device must satisfy the following conditions to work with KAT WALK:

Operation System:

Recommend:Microsoft Windows 10 x64

Minimum system requirement:Microsoft Windows 7 Professional x64

Software/run-time library requirement:

WinRAR Unzip software

Steam (keep updating)

SteamVR (keep updating)

Microsoft Visual C++ 2005 Runtime Library(x86 & x64)

Microsoft Visual C++ 2008 Runtime Library(x86 & x64)

Microsoft Visual C++ 2010 Runtime Library(x86 & x64)

Microsoft Visual C++ 2012 Runtime Library(x86 & x64)

Microsoft Visual C++ 2013 Runtime Library(x86 & x64)

Microsoft Visual C++ 2015 Runtime Library(x86 & x64)

Microsoft .NET Framework 3.5 sp1

Microsoft .NET Framework 4.0

Microsoft .NET Framework 4.5

Microsoft .NET Framework 4.6.2

Microsoft DirectX Runtime

Note:All software/run-time libraries mentioned above can be found on their official websites for free.

WinRAR official website:

Steam official website:

Microsoft download center:

Make sure your hardware and software satisfy the requirement for running VR games and KAT GameFlat. Next, deploy the KAT GameFlat as following.



1.Install KAT GameFlat.

a)Download link:

   Alternate link:     

   b)Unzip the file and run the KATGameFlat.exe program. All steps during installation are set as default.

c)Note: Choose 'Trust' if security software prompts any risk interception; Or close the malware prevention software temporarily.


2. Add dll files.

a) Open the KAT GameFlat, click the reverse triangle on the right top of the login window as shown.



b) Select [Add Dlls], double click the batch file as shown.


 c) A cmd window pops up and 'xx is successfully installed' is shown in the window. Press any button to continue. Finish.


3. Get the current MAC address of your device.

a) Open the KAT GameFlat, click the reverse triangle on the right top of the login window.

   b) Choose [Server] and you can see the MAC address on the pop up window as shown.